Pi-Star DMR Hotspot @ Clubhouse

I have taken one of my hotspots up the the clubhouse to act as DMR access point.  Since the club is mostly a Yaesu System Fusion club I have set it up to take your YSF signal and transmit it via the internet into an DMR talk group. This will let you check into DMR nets via the hotspot. Now since the hotspot has only milliwatts output you must be at the clubhouse to use the hotspot.  Just take your Yaesu handheld or use our FTM-400 radio and tune it to 145.650 Mhz YSF simplex.  Then talk and your signal will go out to the PA DMR net talk group 3142.  There is a net on that talk group 3142 on Tuesday night {Unfortunately the same time as SCARC net} if you want to listen or check in.

What this will be useful for is if anyone needs to get on the PA DMR network to talk or for the next ARES alert/SET Drill that is using DMR transmissions.

If you want access to the hotspot to change to other talk groups please see N3LRG to find out how to use the hotspot.  Below is a picture of a MMDVM Hotspot you can find them on Ebay for $26 on up depending if you want to solder or not. You will need to pick up an Raspberry PI Zero-W to run these boards. These will take any digital signal YSF, DMR, D-Star and put it out on the internet to link up with other reflectors around the world.

Link To Ebay Search

Also note the club SDR receiver will pick up the hotspot too. Goto 145.650 Mhz on the Middle 2m Band there is a bookmark called W3KWH-HOT

46930cookie-checkPi-Star DMR Hotspot @ Clubhouse